Yes, the Replacement Screen Frame # BVC0573-32 has a cutout where your switch can go if you have one.
Regarding the lights, the Command Electronics 328-K-1020BLSM2 was discontinued back in 2022. The only version that is still around with the switch is the 3" # 328-K-1003BLS. What you have measures 4-7/8" in diameter.
The closest thing we currently carry is the Optronics 12V RV LED Puck Light # ILL45CB which is 4-5/8" and would need to be wired to a separate switch. view full answer...
I prefer to go with one of the MORryde equalizers but you are going to need to measure your factory equalizer to determine if you will need the 14-3/4" # MR34AR or 10" # MR54AR. This measurement is going to be from the center of the front hole to the center of the rear hole where the shackle straps attach. You will also need to measure the length of your shackle straps and select either the 2-1/4" # MR46ZR or 3-1/8" # MR76ZR. This measurement is also going to be from center of hole to center... view full answer...
Hey Clarence, so we do have a cushioned equalizer solution that fits your wide track tandem axle setup like with the equa flex part # LC314336 but we don't have a Dexter EZ Flex that fits this size.
We also have a MORryde part # MR34AR which would be my first choice as I prefer the way these rotate to provide the cushioning and MORryde just has a really good reputation in terms of performance and quality. view full answer...
Go To Results